Steel slitting machine

Steel slitting machine This unit is used to cut strips. Slitting machine on the strip cut in 8-16mm. Cut the strip to the roll on the winding, from unloading the raw material, together with coil car moved rewinder reel. And then by a narrow strip rewinder will strip the word layer around the wheel, for use after the procedure. 1,Slitting machine technical parameters 1.1 Width of raw materials: Max250mm 1.2 Materials ID: φ450 φ500mm 1.3 Materials OD: φ1200mm 1.4 The weight of raw materials: Max1000KG 1.5 Material: Carbon steel, stainless steel 1.6 Accuracy requirements: Width tolerance: ≤ ± 0.05mm; Burr: ≤ 0.04mm 1.7 Cut the number of articles: 12 1.8 Cutting Speed: 60m/min 1.9 Winding ID: φ350mm 1.10 Winding OD: φ1200mm 2,Equipment composition 2.1 Feeding cart For the raw material into the open-book paper machine, lifting power 0.75KW, before and after the move to manual, paper feed diameter φ1200mm, coil weight 1000Kg. 2.2 Uncoiler Sizing rolls for manual, open-book machine equipped with pneumatic deceleration and emergency stop devices. 2.3 Shearer The machine contains a guiding device, sub-feed device, waste side coiling device. Motor power 4Kw. Frequency control system drag. 2.4 Loop device 2.5 Coiler Coiler drum for manual sizing. Receive full after-hours, the overall move to the rewinder, winder with AC Frequency Control, Motor Power 7.5Kw. 2.6 Unloading car Will receive full volume disk material removed from the winder reel rewinder used to prepare the motor power 0.75Kw.